#BATTERY BUDDY INSTRUCTIONS HOW TO#
#BATTERY BUDDY INSTRUCTIONS FULL#
#BATTERY BUDDY INSTRUCTIONS PORTABLE#
#BATTERY BUDDY INSTRUCTIONS FREE#

#BATTERY BUDDY INSTRUCTIONS PORTABLE#

Design: Portable Pen Style (push button to activate).

If possible, you may also want to test your cartridge on another device to make sure it is not causing the issue.

At this point you should contact the manufacturer directly or simply purchase a new device.

Other issues may indicate you have a faulty cartridge or a faulty vaporizer battery.

In this case you will want to purchase a good quality 510 thread cartridge and use it instead.

Although, it is not common but some 510 cartridges are poorly made and are non standard dimensions, where the connecting end of the cartridge does not reach the metal of the heating chamber, therefore there is no connection between the device and cartridge.

If the problem persists it means that you are not getting a connection between vaporizer and cartridge or it could either be a faulty cartridge or there is a problem with your vaporizer battery (faulty vaporizer).

(There needs to be a solid connection between the metal part of the cartridge and metal part in the battery chamber so they can conduct an electrical charge).

#BATTERY BUDDY INSTRUCTIONS FREE#

Make sure the connecting surfaces on both the vaporizer chamber and cartridge are clean and free from debris.

If you are trying to vape and the battery seem to be working but no vapor is coming out of the cartridge, try unscrewing the cartridge and screwing in back on again (to ensure that there is a contact between the connector and cartridge).

If the LED button starts blinking 5 or more times, when you are trying to use the device, this means that the battery is out of power and needs to be recharged.

If you are pressing the top operation button and nothing is happening, please make sure the device is turned ON by pressing the button 5 rapidly.

Always make sure your Leaf Buddi UI vaporizer is charged and turned ON.

Battery is now charged and you are ready to vape away.

Once the LED light turns off and battery is fully charged, unplug the Micro USB cable from the vaporizer.

The LED indicator light on the vaporizer will glow RED while it is charging and turn off once the charging is complete.

Insert the USB cable into your computer or any USB charging device.

(Please note it’s best to turn the vaporizer OFF by clicking 5 times rapidly on the operation button).

Plug the Micro USB charger cable into Vaporizer box mod, located at the bottom of the device.

Hold down the operation button and inhale.

(Once it finished Preheating the LED light will turn off, meaning Preheating is complete and you are ready to go).

To use the Preheat function, simply hit the button 2 times rapidly, the LED indicator will light up and start preheating the coil for you.

(As you are firing, indicator LED will light up that particular color and voltage setting to let you know what power setting you’re on). You will see the LED indicator light change color depending on the power setting you desire.

Press the operation button rapidly 3 times to change the power (Variable Voltage) settings.

To turn your battery ON / OFF, click the operation button 5 times rapidly, located at the top of the vaporizer (you should see the LED indicator at the top of the screen blink a couple of times, when it’s ON or OFF).

Screw the cartridge onto the heating chamber of the vaporizer.

Make sure your vaporizer battery is charged (see section below on charging your battery).

#BATTERY BUDDY INSTRUCTIONS HOW TO#

Using Your Leaf Buddi UI Vaporizer How to use the UI mod, come to share the video. Available Colors: Black White Purple Red Blue and Green.Battery protections indicators: low voltage - 5 consecutive blinks (needs to recharge).Easy operation: push button to activate.

4 level variable voltages: 2.7V - 3.3V - 3.7V - 4.1V (3 clicks to change voltage setting).

#BATTERY BUDDY INSTRUCTIONS FULL#

Battery voltage: 2.7V – 4.2V (at full charge).

Battery: internal long-lasting 650mAh battery (built-in).

Material: lightweight aluminum alloy and PVC.

Design: portable mini unique ergonomic design (push button to activate).

Battery buddy instructions